Recovering a Footstool

I made this footstool in high school during shop class.  Yep, I used a lathe and everything, but don’t ask me to repeat the process.  I really don’t remember what I learned from that class or any class from high school for that matter!

I have wanted to recover this footstool for a while now as it doesn't really match anything.  Originally, I covered the cushion in a light green fabric.


I decided to give recovering with canvas drop cloth a try. I turned the footstool over and cut a piece of drop cloth to cover.  After making sure it fit, I quickly made a seam on the edge to prevent fraying.


Using a staple gun I secured the drop cloth to the bottom of the footstool.


Now, I know this doesn't look pretty but who really sees the bottom side anyway?


Just pull the fabric and staple when smooth.  I find it works better to place a staple in the middle and work your way out to the edges with your staple gun.


And now the finished top…


Quick and cheap fix.  If I want to change the fabric, it will be easy just to take out the staples and repeat the process with a new patterned fabric.


As Always,
Sandra

Sprucing Up Register Covers

I’m sure many homes have this same problem…

Dirty and rusty register covers.  We have a forced air system to heat and cool our house.  As a result, we have register covers in all of the rooms in the upper levels.  After a while, register covers get dirty and can even start to rust.  The register cover in our main bathroom was looking pretty gross with rust.




Here is what you can do to make your register covers look better without spending lots of cash to replace them.  Give spray paint a try.  I used Rustoleum Semi-Gloss in White (costs about $10 for a large bottle, which would be enough to cover multiple register covers).

First, wipe the covers clean with a wet paper towel or rag.  You don’t need to clean them super well, try to get most of the dust off if nothing else.  Make sure the register covers are completely dry before you start spray painting.

I took my register covers outside on a large piece of cardboard (a flattened diaper box actually).  I also wear gloves so I don’t get spray paint all over my hands.  I’m a pretty messy painter!

Start by turning over the register cover so the underside is facing up.  Give it a few quick light coats of spray paint to avoid runs.  My cover was pretty rusty so I made sure to coat it well.  Let it dry.  I brought my cardboard with the register covers into the garage for the night.

The next day, I took them outside again and turned them over and spray painted the other side (the side you normally see).  I coated mine well with light coats to avoid drips and runs.  Again, I brought them in the garage to dry for the night.  Depending on your climate, the covers may dry faster or slower.  If they are tacky to the touch, give them more time before turning them over to finish painting.


This register cover is for our bathroom but I gave it a try in our dining room to see the difference once the register cover is in the floor. Since our bathroom does not have any natural light, pictures hard to take in there, so I decided to show you how it looks in the dining room instead.

Here is the Before…


And the After…


So much cleaner.  Do you have any quick ideas for spray paint to save money and give something a new clean look?

As Always,
Sandra

Cleaning a Jet Tub…

Our new house has a jet tub in the master bath.  I have never owned a jet tub before and had no idea of the best way to clean it.  As a result, pink grossies keep appearing in and around the jets and mildew would collect inside the jets and litter the bath water with black chunks. ICK.  I needed a solutions so I could enjoy baths again.


After a little research, here is what I needed to do.


A whirlpool or jet system should be flushed twice a month or more, depending on usage.  Check your tubs instructions, but this is what I needed to do:

1. Close air volume controls by turning the jet clockwise.

2. Fill the bath with hot water to a level 2” above the highest jets.

3. Add 4 ounces of household bleach to the water.

4. Run the whirlpool for 5 to 10 minutes, then shut off the whirlpool and drain the water.


5. Fill the bath with cold water to a level 2” above the highest jets, and run the whirlpool for another 5 to 10 minutes to rinse.  Drain the bath and wipe it dry with a soft cloth.

I don’t use the jet tub lots especially since we get our water hauled out (we have a cistern).  But I do enjoy an occasional bath and I’m glad I found a pretty easy way to clean and sanitize it.  Now I can enjoy baths again!

As Always,
Sandra